Parts

iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.

- Service parts for E-13 chainguides - Fits: 06+ single ring guides

Zipp's Service Course Bar Tape offers excellent cushioning and a fine grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

Zipp’s Service Course SL-80 bars keep the drops close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.

Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Specialized S-Works cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. One chainline option is available for S-Works cranks. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M1 (minus 1mm - dished toward the frame): For 49mm chainline, designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes.

These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy

The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only

Wolf Tooth Supple handlebar tape is extra-thick, extra-wide, extra-soft, and extra-tacky. Designed for the abuse of unforgiving trails, the 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch

Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

This assortment of chainring spacers contains 120 pcs. in a clear plastic storage box. Kit includes: - (20) 0.6mm - (20) 1.2mm - (5) 2mm - (5) 3.8mm - (5) 2.2mm - (5) 3mm - (5) 3.5mm - (10) 4mm - (10) 4.3mm - (10) 4.6mm - (10) 5mm - (5) 5.3mm - (5) 7.1mm - (5) 8.3mm

Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt